LEICA M11 Monochrom Rangefinder Camera - Manual (Page 96)

PHOTOGRAPHY ▸ SHOOTING TYPES 96
Showing or hiding the auxiliary displays
22:45 PM 22.02.2012
999-9000
8234/9999 12 MP
2.8 F 1/8000 12500 ISO EV
INFO
22:45 PM 22.02.2012
999-9000
8234/9999 12 MP
2.8 F 1/8000 12500 ISO EV
INFO
▸ Press the center button
• The display toggles between a visualization with or without
information displays.
or
▸ Tap anywhere on the LCD panel
Displaying the exposure information (only)
The exposure information is displayed in the middle part of the
footer: ISO value, light balance and shutter speed. Depending on
the initial situation, the display toggles to the other setting when the
shutter button is held at the first pressure point. That applies to the
info bars only.
▸ Tap and hold the shutter button
• Exposure information is displayed at the bottom of the screen.
• All other visible displays of the info bars will be hidden.
Notes
• Live View mode is based on the image captured by the sensor.
The camera must control the shutter. Shutter control is audible
and may result in a slight delay in shutter release.
• The camera will warm up when Live View mode is used for an
extended period of time. Power consumption will simultaneously
increase.
• Alternating current causes brightness fluctuations invisible to the
human eye in many light sources. This may result in a flickering of
the Live View screen image due to the sensitivity and scan rate of
the image sensors. Image quality will not be impacted. The effect
can be avoided by selecting a slower shutter speed.