IBM SG24-4817-00 - Manual (Page 221)

This soft copy for use by IBM employees only.
has been detected.
When incompatible-level the module is a redundant switch module
operational, but its microcode level is not compatible with
the microcode level of the active control point switch
module and the active configuration is not copied in the
redundant module. If a switch over is performed, the
current configuration is not restored. To guarantee a
good restoration, the back level switch must be upgraded.
″
::= { moduleEntry 8 }
moduleErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The number of errors detected by this module on the traffic
from the switch to this module.
″
::= { moduleEntry 9 }
moduleMaxVpc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The maximum number of VPC supported by this module.
The current number of VPC that can be used is the difference
between moduleMaxVpc and moduleUsedVpc.
″
::= { moduleEntry 10 }
moduleUsedVpc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The number of VPCs currently in use for this module.
The current number of VPCs that can be used is the difference
between moduleMaxVpc and moduleUsedVpc.
″
::= { moduleEntry 11 }
moduleMaxVcc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The maximum number of VCCs supported by this module.
The current number of VCCs that can be used is the difference
between moduleMaxVcc and moduleUsedVcc.
″
::= { moduleEntry 12 }
moduleUsedVcc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The number of VCC currently in use for this module.
The current number of VCC that can be used is the difference
between moduleMaxVcc and moduleUsedVcc.
″
::= { moduleEntry 13 }
Appendix E. IBM ATM Campus Switch Private MIBs
205