Sharp DK-A10 - Manual (Page 14)

14
DK-A10
DK-A10BK
iPod
Listening to the iPod
Supported iPod:
iPod nano (software 1.0 above)
iPod photo (software 1.0 above)
iPod mini (software 1.2 above)
5th Generation iPod (software 1.0 above) (Dock connector
equipped Click Wheel model)
4th Generation iPod (software 3.0.2 above) (Dock connector
equipped Click Wheel model)
3rd Generation iPod (software 2.2 above) (Dock connector
equipped Click Wheel model)
Notes:
Once the iPod is connected to the unit it will begin charging.
The iPod unit cannot be charged while the main unit is in the
stand-by mode.
Auto power on function:
When you press any of the following buttons, the unit turns on.
iPod button (main unit): The unit turns on and the “iPod” function
is activated.
/ button (main unit and remote control): The unit turns on and
playback of the last function will start (iPod, CD, TUNER, AUX).
iPod adaptor connection
Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly
into the correct adaptor. If your iPod is not mentioned below, an iPod
adaptor may have been included with your iPod unit.
Note:
If you have an iPod that does not have an iPod connector, you can
use an audio cable to connect it to the AUX IN jacks.
iPod
Adapter
No.
iPod Description Capacity
3 iPod mini 4GB & 6GB
4 4G iPod & U2 iPod 20GB
5 4G iPod 40GB
6 iPod photo & Color U2 iPod 20GB & 30GB
7 iPod photo 40GB & 60GB
6 iPod with color display 20GB
7 iPod with color display 60GB
8 iPod nano 2GB & 4GB
9 iPod (10/12/05 w/video) 30GB
10 iPod (10/12/05 w/video) 60GB
7
The number (3-10)
shows which iPod fits