Sharp DK-A10 - Manual (Page 18)

18
DK-A10
DK-A10BK
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc (continued)
Playback will begin from track 1.
After the last track on the disc is played, the unit will stop
automatically.
To remove the discs:
In the stop mode, press the EJECT button.
Caution:
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc while it is moving.
If the power fails while the disc is moving, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Various disc functions
Notes for CD or MP3/WMA disc:
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Insert the disc into the disc, label side up.
4 Press the OPEN/CLOSE button to close the disc tray 1.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
5 Press the / button to start playback.
5" (12 cm) 3" (8 cm)
Total number of
tracks on the disc Total playing
time of the disc Total number
of files
[CD] [MP3/WMA]
Disc play indicator
Function Main unit Remote
control
Operation
Play Press in the stop
mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.
Track up/
Track down Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
Fast for-
ward/Fast
reverse Press and hold down
in the playback mode.
Release the button to
resume playback.
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi session discs which writing is not finished, can
still be played.