Sharp DK-A10 - Manual (Page 24)

24
DK-A10
DK-A10BK
Radio
Listening to the radio (continued)
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord becomes
disconnected.
To recall a memorized station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
To erase entire preset memory
1 Perform steps 1 - 3 in “Tuning” on page 23.
2 Press the MEMORY button to enter the preset tuning
saving mode.
3 Within 30 seconds, press the or button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY button to store that
station in memory.
If the “MEMORY” and preset number indicators disappear
before the station is memorized, repeat the operation from step
2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Press the or button for less than 0.5 seconds to select the
desired station.
1 Press the or button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the or button again when the desired
station is located.
1 Press and hold the CLEAR button for more than 3 seconds.
“TUN CLEAR” will be displayed.
2 Within 10 seconds, press the MEMORY button.
“COMPLETE” will be displayed.
FUNCTION CLOCK
SLEEP ALARM
SNOOZE/
DIMMER
VOL
DISPLAY FOLDER
PLAY
MODE
TUNING
MEMORY
EQ CLEAR
E SOUND /DEMO