Sharp DK-A10 - Manual (Page 26)

26
DK-A10
DK-A10BK
Advanced Features
Alarm and sleep operation (continued)
Sleep operation
The radio and iPod can be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
To use alarm and sleep operation together
Sleep and alarm:
For example, you can fall asleep listening to the radio and wake up
to iPod in the next morning.
1 Play back the desired sound source.
2 Press the SLEEP button to select sleep time.
3 Press the MEMORY button.
“SLEEP” will appear.
4 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
1 While “SLEEP” is indicated, press the SLEEP button once to se-
lect “SLEEP XXX”.
“XXX” is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the SLEEP button (steps 2 - 3).
1 While “SLEEP” is indicated, press the SLEEP button to select
“SLEEP OFF”, and press the MEMORY button.
1 Set the sleep time (see left, steps 1 - 4).
2 While the sleep timer is set, set the alarm
(steps 1 - 5, page 25).
Sleep timer setting Alarm setting
Sleep operation will
automatically stop Alarm start time
End time
10 minutes - 2 hours 30 minutes