Sharp DK-A10 - Manual (Page 20)

20
DK-A10
DK-A10BK
CD or MP3/WMA disc Playback
Advanced CD or MP3/WMA disc playback (continued)
Programmed play
You can choose up to 32 selections for playback in the order you like.
To cancel the programmed play mode:
While in the stop mode and the “MEM” indicator is lit, press the
CLEAR button on the remote control. The “MEM” indicator will disap-
pear and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEM” indicator will be
displayed. Then follow steps 1 - 6 to add tracks. The new tracks will
be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or button.
Notes:
When a disc with programmed tracks is ejected, the program is
automatically canceled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.
1 While in the stop mode, press the
MEMORY button to enter the
programming save mode.
2 Press the or button to
select the desired track.
Selected track number
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5 Press the button.
The total number in memory will
appear.
6 Press the / button to start playback.
MEMORY
To clear the programmed selections:
Press the CLEAR button on the remote con-
trol while the “MEM” indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.