Xerox 701P21091 - Manual (Page 134)

Specifying input parameters
2-26 Using LCDS Print Description Language
IDEN OFFSET
Specifies the number of bytes (beginning at 0) from the
beginning of the user portion of the record to the beginning of the
prefix string constant of the DJDE record. The number may be
negative.
Syntax IDEN OFFSET = value
Options
Default 0
IDEN OPRINFO
Specifies whether or not the DJDE record is printed and
delivered to the stacker.
Syntax IDEN OPRINFO = {YES | NO}
Options
Default NO
IDEN OPRINFO
parameter: point
to note
When OPRINFO=YES is selected, the length of the DJDE record
that prints on the sheet is whatever amount fits on the width of
the paper.
Table 2-24. IDEN OFFSET parameter option and definition
Option Definition
value Specifies the number of bytes (beginning at 0) from the beginning of the user
portion of the record to the beginning of the prefix string constant of the DJDE
record. It may be a negative number.
Table 2-25. IDEN OPRINFO options and definitions
Option Definition
YES Specifies that the DJDE record prints and is delivered to the stacker.
NO Specifies that the DJDE record does not print.