Xerox 701P21091 - Manual (Page 364)

Using Dynamic Job Descriptor Entries (DJDEs)
5-12 Using LCDS Print Description Language
ITEXT Specifies a text message that will be displayed to operators during
processing.
JDE Specifies the JDE to be used within the selected JDL at the next page
boundary.
JDL Specifies the name of the JDL to be invoked at the next page boundary.
MAP References a previously created font mapping file.
MARGIN Specifies the left printing margin within each logical page.
MODIFY Specifies the CME to be used on each subsequent logical page.
NUMBER Specifies page numbering control.
OTEXT Provides a text message to be displayed to the operator during job
printing.
PALETTE Specifies the palette of inks that will be used for subsequent pages.
PMODE Specifies the printing mode for each page (either landscape or portrait).
RFORM Specifies whether a form is printed on all RTEXT pages.
RTEXT Specifies text to be printed on a separate page preceding each report
copy.
SEFMAP Specifies a font mapping table.
SHIFT Specifies a shift of page image (page content) for binding purposes.
SF1FUNCTION Specifies sheet finisher function number 1 through the DFA channel C6.
SF2FUNCTION Specifies sheet finisher function number 2 through the DFA channel C7.
SIDE Specifies the repositioning of the next logical page to the first logical
page position of the given side of a physical sheet of paper.
STOCKS Redefines the parameters of a STOCKSET command (the types of
stocks to use) for the page.
TMODE Specifies process direction measurement for determining default pitch
modes.
TRANS Specifies whether transparencies are used in the print job.
XSHIFT Allows shifting in the x direction for short edge binding.
Table 5-4. Page oriented DJDEs (Continued)
DJDE Function