Xerox 701P21091 - Manual (Page 328)

Specifying print format parameters
4-88 Using LCDS Print Description Language
Options
Default No default
OUTPUT XSHIFT
Specifies whether or not the image of the form and data on a
page is to be shifted downward or upward (thus changing the x
coordinate of the logical page origin) and if so, by what values.
XSHIFT is used to shift the image of the data downward or
upward (as a long edge feed page is viewed in portrait
orientation) to accommodate predrilled stocks, binding, finishing,
edgemarking, and short-edge binding.
Syntax OUTPUT XSHIFT = {YES | NO | value}
Options
Default No default
Table 4-80. OUTPUT UNITS parameter options and definitions
Option Definition
size An integer value constant that defines the number of dots in a user defined
unit (UN).
When used to compute the position of a graphic, the result is rounded to
the nearest dot.
Table 4-81. OUTPUT XSHIFT parameter options and definitions
Option Definition
YES Specifies that the page image will be shifted up or down.
NO Specifies that no X-image shift will occur.
value An integer that specifies a shift amount on the front and back sides of a page.
The shift is upward on a portrait oriented page when a positive value is
specified, and downward when a negative value is specified. (Each dot is 1/300
of an inch.)
The allowable range is 80 to –80.