Xerox 701P21091 - Manual (Page 419)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-67
SF2FUNCTION DJDE
Specifies to the third party finisher whether or not it should
perform the user defined SF2 operation on the current sheet.
SF2FUNCTION invokes the C7 signal of the electronic interface
between printing system and a third party finishing device. (Refer
to your finishing equipment vendor device documentation for
more detailed information.)
Type Page oriented
Syntax SF2FUNCTION = {YES | NO}
Options
SHIFT DJDE
Shifts the printed image from the edge of the physical page. This
DJDE is commonly used to accommodate hole drilling or
binding.
Type Page oriented
Syntax SHIFT = {YES | NO | (v
1
, v
2
)}
Table 5-56. SF2FUNCTION DJDE options and definitions
Option Definition
YES Instructs the finisher to begin the operation defined as SF2 on the current
sheet.
NO Instructs the third party finisher not to perform on the current sheet the
operation defined as SF2.