Xerox 701P21091 - Manual (Page 142)

Specifying input parameters
2-34 Using LCDS Print Description Language
Default A table of PSP1 (Print and Space 1) codes
PCC DEFAULT
parameter: point
to note
The DEFAULT parameter must precede any ASSIGN parameter.
Any preceding ASSIGN parameter is not incorporated into the
PCC table.
PCC INITIAL
Specifies the initial reference point (TOF or BOF) from which a
job performs its first carriage control function.
Syntax [ac:] PCC INITIAL = {TOF | BOF}
Options
Default TOF
PCCtype Parameters and the tables that can be modified are:
•
ANSI
• B2500
• B2700
• B3700
• B4700
• B6700
• H2000
• H6000
• IBM1401
• IBM1403
• IGN
• OVR
• TOF
• US70
• XEROX
• NONE
Table 2-34. PCC DEFAULT parameter options and definitions (Continued)
Option Definition
Table 2-35. PCC INITIAL parameter options and definitions
Option Definition
TOF Specifies that the control program will perform the first spacing, skipping, or
printing action from the Top Of Form (top of page image).
BOF Specifies that the control program will perform the first spacing, skipping, or
printing action from the Bottom Of Form (bottom of page image).