EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 105)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
95
The loaded playlist is displayed and the current playlist element on the Remote Panel
is selected.
2. Type the desired name for the element on the keyboard.
It appears in the Name field at the bottom of the screen. Use <BACKSPACE> to
delete the last character, or ESC to clear the entire field.
3. Press F1 to assign the new name to the current element.
The name for the current element will appear in the Name column of the selected
element.
11.7 Browsing Within a Playlist
11.7.1 Possible Browsing Methods
You can browse within a playlist in different ways:
• Browse quickly by jumping to the first field of each clip in the playlist:
For more information, see the section 11.7.3 ‘Browsing Quickly Through a Playlist’,
on page 95.
• Browse through the content of each clip in the playlist:
For more information, see the section 11.7.2 ‘Browsing Through a Playlist’, on page
95.
11.7.2 Browsing Through a Playlist
When you load a playlist, the default playlist mode allows you to scroll up and down
through all the playlist elements.
11.7.3 Browsing Quickly Through a Playlist
When you are neither in Playlist nor in Clip mode, pressing the BROWSE key on the
Remote Panel automatically enters the current playlist in Browse mode.
In this mode, you can quickly jump to the first field of each clip inside the playlist by
moving the jog dial. To return to the normal Playlist Edit mode, press the BROWSE key
again.
When you are in Playlist Edit mode, you can of course also activate the Browse mode by
pressing the BROWSE key.
PL11 LSM01 Paola LOC TDUR=00:00:02:22
111A/04 Clipname0123 00:00:29 Unk W00:10
112B Clipname4567 00:53:29 Unk W00:10
112B/02 Clipname8910 00:53:29 Unk W00:10
Effect Edit All
Insert Speed FX Dur Delete