EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 121)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
111
11.13.4 Consolidating a Playlist
Overview
Using the internal loop, you can record a playlist back to the server as a big clip if you
want, for example, to record the playlist effects (split screen, target tracking, painting,
etc.) as regular video inside the server.
Depending on the
Internal Loop -parameter in the Operational Setup menu (p.9.2 F6),
both video and audio can be looped back into the system, or only the video track is
looped and the system keeps recording the live audio at the same time.
How to Loop Back a Playlist into the Server
To consolidate a playlist using the internal Loop mode, proceed as follows:
1. Add the requested effects to the playlist.
2. Recue the playlist.
3. Activate the Loop mode via the SHIFT+LOOP
key.
4. Roll the playlist.
The playlist will be recorded onto the disks (Channel 1 – CAM A) as a continuous
video/audio stream.
When you exit the playlist mode, go back to LIVE record and simply jog back, you will see
the playlist recorded with all its transitions and at the speed they were played.
11.13.5 Generating a Continuous Timecode in a Playlist
Overview
You can regenerate a continuous timecode for the whole playlist or for each clip of a
playlist. This can be useful when:
• you do not want to have a playlist with disrupted timecodes from the various playlist
elements
• you want to change the timecode type in the VITC or LTC timecode