EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 154)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
144
Original Timeline
111A 111B 146A 184C
111A 111B 146A 184C
111A 111B 146A 184C
V
A1
A2
111A 111B 184C
111A 111B 146A 184C
111A 111B 146A 184C
V
A1
A2
Extend from IN
IN OUT
How to Perform an Extend
To perform an Extend on the Remote Panel, proceed as follows:
1. Recall the requested timeline by selecting its page (SHIFT+Page+F
_ key) and bank
(SHIFT+F10) and the timeline position ( F_ key).
2. Press PLST to load the timeline in Timeline Edit mode.
3. Use the jog dial to position on the requested Mark IN point and press the IN key.
4. Use the jog dial to position on the requested Mark OUT point and press the OUT key.
‘IN’ and ‘OUT’ are displayed on the OSD.
The Extend option is displayed on the LCD menu:
Video Audio 1 Audio 2 Extend
5. Press the D key (Extend) on the Remote Panel to perform the Extend action.
The LCD display and menu changes become the following one:
Extend?
[Menu]: Cancel [Enter] : Confirm
From In From OUT
6. Press the A (Extend from IN) or B key (Extend from OUT) to select the Extend action.