EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 184)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
174
18.2 Menus
18.2.1 Accessing and Leaving the Hypermotion Mode
To access the hypermotion menu, press SHIFT+D ( HyperMo) in your Remote perational
menu.
To leave the hypermotion menu or switch to the PGM control, press again SHIFT+D in
the operational menu.
Note
In hypermotion+LSM mode, the
D’ key displays LSM Mode.
18.2.2 Hypermotion Main Menu
The hypermotion main menu displays the memory blocks that have been selected in the
# Blocks parameter of the hypermotion secondary menu. The memory blocks use is
described later in this chapter.
Only the activated blocks will be displayed and the highlighted block is the one the
operator is currently working on.
LSM Mode
Block 1 Block 2