EVS XT3 Version 11.00 Configuration Manual - Manual (Page 136)

The screenshot below shows the Timecode Insertion settings in SD on page 9 of the
Channels tab in the server-based application:
The screenshot below shows the Timecode Insertion settings in HD.
In Loop
D-VITC
The D-VITC (Digital Vertical Interval Timecode) and userbits are always written on the
monitoring SD outputs of the record codec and are the same as on the source video.
Lines
Description Lines on which the VITC must be written on the output
connectors of the record codec.
Values From 06-08 to 20-22
Default Values 14-16 in NTSC
19-21 in PAL
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 130