EVS XT3 Version 11.00 Configuration Manual - Manual (Page 36)

2.4.2. Options Codes Management Window
In the Server-Based Application
The window features three areas which contain the information mentioned below:
Area Description
Upper area List of key settings related to the EVS server:
• System ID: ID code of the hardware key, necessary for license
code calculation.
• Serial number: Serial number of the mainframe, also written on
the back plate of the mainframe.
• User: The user name is a label for information's sake only.
• Chassis: Type of mainframe. If this value is wrong, audio and
video routing inside the system will not work properly.
• PSU type: Type of CPU installed on the chassis: standard or
hot swap.
• Key date and time: Expiration date & time for temporary
license codes. Not available when the permanent codes are
installed.
Central area All codes available for the given server chassis.
Next to each code name, the code number, the type of license
(permanent, temporary, demo, or 'not granted'), as well as the
expiration date are mentioned.
Lower area Area where you can enter new license codes manually.
The commands on how to import new license code from files are
specified.
XT3 Server - Version 11.00 - Configuration Manual
2. Multicam Setup 30