EVS XT3 Version 11.00 Configuration Manual - Manual (Page 75)

Parameter Name Basic Advanced
Technical
Setup
Primary TC X X
SMPTE 334M packets
management settings — P8 T2.13
Decoding X X
Encoding X X
Custom 1 / 2 X
SD OUT Encoding X
Timecode insertion settings — P9 —
IN Loop settings X
SD OUT settings X
HD OUT settings X
3.3.2. Channels
Base Settings
Introduction
The base settings allow defining the main characteristics of a configuration as regards
play and record channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T2.7 and T2.8).
Warning
Some base settings (Inputs, Outputs Base config.) require an application reboot
(ALT+Q from the operational windows) for changes to be taken into account.
69 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C