EVS XT3 Version 11.00 Configuration Manual - Manual (Page 207)

Push Mode
Description Specifies how the clips should be sent using the PUSH
function, that is to say with or without the original guardbands.
Values The following values are possible:
• Short:
The clips are sent from the Short IN to the Short OUT
points, to which the guardbands of the destination
machine are added.
• Long:
The clips are sent from the Protect IN to the Protect OUT.
Default Values Short
Push Receive Page
Description Specifies the page of your machine where clips sent to you by
other network operators using the PUSH function must be
stored.
For more information on how to enable pages, see section
"Navigating and Editing in the Multicam Configuration
Window" on page 45
Values Page 1 to 10 (=0). Several pages can be selected.
Default Values (Page) 5
201 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C