EVS XT3 Version 11.00 Configuration Manual - Manual (Page 152)

Aspect ratio - SD downconverted
Description Changes the aspect ratio of the video output in SD mode.
Values • 16:9 Anamorphic
• 4:3 Crop
• 4:3 Letterbox
Default value 16:9 Anamorphic
Db15 output
Description Specifies the DB15 output.
Values • RGB
• YUV
• CVBS (in this format, the connected Multiviewer should
be full HD and support the country-specific frequency)
HD output format
Description Specifies the format for HD output.
Values • 720p
• 1080i
Default value • 720p (if the server is configured in 720p)
• 1080i (in other cases)
3.5.3. OSD Settings
Introduction
The OSD settings allow specifying the settings related to the OSD and information to be
displayed on the monitoring screen.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Monitoring tab.
• in the Technical menu of the Remote Control Panel (T4.1).
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 146