B&B Electronics 100-POE4 - Datasheet - Manual

The N-TRON ® 100-POE4 Industrial PoE Mid-Span
Injector is designed to trasmit power along with data over an
Ethernet network. It is ideal for powering PoE capable devices
where running an AC power feed is either not possible or cost
effective. PoE allows an end user to power a PoE camera,
wireless access point, or any other PoE capable device without
the need for running separate wires for power. This also allows
the ability for a centralized battery backup for all these devices.
PRODUCT FEATURES
• Compact, Space Saving Package
• IEEE 802.3af Compliance
• American Bureau of Shipping (ABS) Type Approval
• EN50155 for Railway applications
• Four 10/100BaseTX RJ-45 Ports (Data In)
• Four 10/100BaseTX RJ-45 PoE Ports
(Data & Power Out)
• Unmanaged
Operation
• Extended Environmental Specifi cations
•-40ºC to 85º Operating Temperature
• Automatic Detection of Connected PoE Devices
• Up to 0.8 Gb/s Maximum Throughput
• Full Wire Speed Communications
• Supports 15.4 Watts per port
(13 Watts at the PD)
• Redundant Power Inputs (46-49 VDC)
• Power Fault Status LED
• LED PoE Status Indication
• Hardened Metal DIN-Rail Enclosure
PRODUCT OVERVIEW
Ideal for upgrading non-PoE network infrastructures with
PoE capabilities, the 100-POE4 Industrial PoE Mid-Span
Injector is designed to solve the most demanding industrial
communications requirements by providing high throughput
and minimum downtime while also providing power to PoE
capable devices over the existing Ethernet network.
The 100-POE4 provides four pairs of two RJ-45
10/100BaseTX copper ports. Each pair consists of one
RJ-45 port that connects to an existing network, and one
RJ-45 PoE capable port that can send data and, up to 15.4 watts
of power to a PoE capable device. The data on all four pairs
are isolated from each other allowing for ease in upgrading
non-PoE network infrastructures.
The
105FX-POE
automatically detects any PoE device
that is connected and powers it accordingly. If a PoE fault is
detected on a specific port the Auto-disconnect feature
disables PoE power on that port, allowing only data
communications to pass. This reduces the risk of damaging
costly equipment.
The 100-POE4 is an ideal candidate for providing data and
power to wireless LAN access points, network cameras, VoIP,
and other PoE capable devices. The product also helps
reduce costs by eliminating the need for electrical wiring and
electrician expenses.
The 100-POE4 has extended operating environmental
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience the device
can be DIN-Rail mounted alongside Ethernet I/O or other
Industrial Equipment.
To increase reliability the 100-POE4 provides dual redundant
power inputs. Dual LED's indicate that power is being applied
with a valid power source on the respective redundant power
input. This allows for easy monitoring of the two redundant
power inputs. A global power LED is also present at the top
of the unit to indicate an overall valid power source or when
a power bus fault occurs.
THE INDUSTRIAL NETWORK COMPANY