B&B Electronics DR9MTB - Datasheet - Manual

Document No. DRxxxTB0912 – pg. 1/1
www.bb-elec.com [email protected] [email protected]
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
P
RODUCT
IN
F
ORMA
T
ION
B&
B
E
L
E
CT
R
ON
ICS
Model DR25FTB
DIN Rail Mountable DB to Terminal Block Adapters
Models DR9FTB, DR9MTB, DR25FTB and DR25MTB
Make wiring in an industrial cabinet a cinch with these DB to terminal block
adapters. Connections can be made easily and quickly without special tools.
Install them once--then you can replace components with a simple unplug/re-
plug, rather than tediously unfastening and refastening numerous wires
individually to terminal blocks. Their compact size and DIN rail mountability is
perfect for that wiring area with limited space.
Each pin on the DB connector has a corresponding terminal block that is
marked. In addition an extra terminal block is provided that connects to the
shield of the DB connector (used for grounding purposes). The DB
connectors accept the industrial standard 4-40 locking screws.
Specifications
Dimensions: 2.9 x 1.3 x 2.1 in (7.4 x 3.3 x 5.5 cm) (DR9FTB and DR9MTB)
2.9 x 2.8 x 2.1 in (7.4 x 7.1 x 5.5 cm) (DR25FTB and DR25MTB)
Housing: Plastic
Mounting: 35 or 32mm DIN Rail
Terminal Blocks:
Up to 14 AWG (Compression Clamp Terminal Blocks)
Voltage Rating: 125 VAC, 150 VDC
Current Rating: 1 A
Weight: 1.9 ounces (DR9FTB and DR9MTB)
3.8 ounces (DR25FTB and DR25MTB)
DR9FTB ...... DIN Rail Mount DB9 Female to Terminal Block Adapter
DR9MTB ..... DIN Rail Mount DB9 Male to Terminal Block Adapter
DR25FTB .... DIN Rail Mount DB25 Female to Terminal Block Adapter
DR25MTB ... DIN Rail Mount DB25 Male to Terminal Block Adapter
Model DR9MTB