B&B Electronics EIRP410-2SFP-T - Datasheet - Manual

www
.
bb
-
elec
.
com
|
10 Port Industrial ethernet switch
with 2 rJ-45/sFP combo Ports
for gigabit ethernet
EIRP410-2SFP-T
10 Port Industrial ethernet switch
with 2 rJ-45/sFP combo Ports
for gigabit ethernet
EIRP410-2SFP-T
The EIRP410-2SFP-T is a 10 Port unmanaged Industrial Ethernet Switch.
In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports
to accommodate Gigabit Ethernet.
small Form-factor Pluggable (sFP) Port: The SFP Ports provide flexibility
when planning a network. Modules are available in multiple fiber formats.
If an SFP module is not inserted, the associated combo port can be used
with standard RJ-45 copper.
high-speed transmissions: The switch includes a switch controller that
automatically senses transmission speed (10/100/1000 Mbps). The RJ-45
interface also auto-detects MDI or MDI-X, eliminating the requirement for
a crossover cable. Each port is buffered and supports store-and-forward
protocol.
dual Power input: To reduce the risk of power failure, the switch has two
48 VDC power inputs. If the power fails, the switch will automatically use
the secondary power input. Also, if the power goes out the corresponding
P1 or P2 LED will go out and the Fault LED will light. The contacts for the
alarm output will also open.
Flexible Mounting: IP30 metal enclosure - DIN or Panel mounted.
Power Over Ethernet (PoE); The eight 10/100 ports are classified as power
sourcing equipment (PSE) . These ports can be used to power IEEE 802.3af
compliant powered devices (PD), eliminating the need for a separate
power supply for each device. (15.4W per port)
wide operating temperature: With an operating temperature of -40
to 75°C (-40 to 167°F), this switch is suitable for use in harsh industrial
environments.
easy troubleshooting: There are two LED indicators for each port that
display the link status and transmission speed. Three LED indicators for
power (P1, P2 and Fault) show power status. FWD LEDs on each PoE port
indicate when a powered device is connected. These indicators allow
you to quickly diagnose and correct problems and ensure your network
remains reliable.
• Eight 10/100 BaseT 802.3af End Point PoE Ports
• Two RJ-45/SFP 100/1000 Combo Slots for Gigabit Ethernet
• UL, cUL CE/EN 60950
• Wide Operating Temperature (-40 to 75C)
• DIN Rail or Panel Mount
Product FeAtures
AccessorIes
SDR-240-48 - DIN-Rail Power Supply, 10A, 240W, 48V
C5UMB3FBL - 3 ft. (1 M)- Blue - Category 5e UTP Patch Cord
DFMM-LCLC-1M - Multi-Mode Duplex Fiber Cable, LC To LC, 1 Meter
DFSM-LCLC-1M - Single-Mode Duplex Fiber Cable, LC To LC, 1 Meter
SFP-1000SX-M-550M-T - SFP Module, 1000Base-SX, Multi-mode 550m, LC
Connector (-40 to 85°C)
SFP-100FX-M-2KM-T - SFP Module, 100Base-FX, Multi-mode 2km, LC Connector
(-40 to 85°C)
SFP-1000LX-S-10KM-T - SFP Module, 1000Base-LX, Single-mode 10km, LC
Connector (-40 to 85°C)
SFP-1000LX-S-20KM-T - SFP Module, 1000Base-LX, Single-mode 20km, LC
Connector (-40 to 85°C)
SFP-100FX-S-30KM-T - SFP Module, 100Base-FX, Single-mode 30km, LC
Connector (-40 to 85°C)
orderIng InFormAtIon
Model nuMBer descriPtion
EIRP410-2SFP-T
Industrial Gigabit Switch (8 PoE, 2 CU/SFP)
Power Over Ethernet Sourcing
EIRP410-2SFP-T_3713ds