FlexLink Spiral Elevator - Manual (Page 30)

Unload the Spiral Elevator
Page 24 of 68 5478EN-3
4.2.1 Erecting the Spiral Elevator
This section is for taller Spiral Elevators which are transported in the
horizontal position.
When putting the unit upright or when moving the Spiral Elevator make
sure that the floor is level and clean and has sufficient load carrying
capacity.
It is generally safer to move the Spiral Elevator to a position close to the
final area with the Spiral Elevator remaining on the delivery packing (where
applicable).
When the Spiral Elevator is near to the final position it can be put upright.
Dependent on the situation, the Spiral Elevator can be raised to upright
using a hoist, a crane or a forklift truck.
Device(s)
.
Note! Make sure when raising to upright, that there is enough
space / height to put the Spiral Elevator upright.
Hoist Crane Open-end spanner