IAI America RCM-101-USB - Manual (Page 130)

9. Setup
118
[3] Synchronizing to PC Clock
The date and time on the PC is set to the controller.
When the setting is complete, the message “The time setting was completed” (Fig. 9.7)
appears.
Fig. 9.7 Time Setting Completion Message
If the setting was not successful, the message “It failed in the time setting” (Fig. 9.8) appears.
Fig. 9.8 Time Setting Failure Message
[4] Setting button
Clicking this button sets the date and time set in [1] and [2] to the controller.
When the setting is complete, the message “The time setting was completed” (Fig. 9.9)
appears.
Fig. 9.9 Time Setting Completion Message
If the setting was not successful, the message “It failed in the time setting” (Fig. 9.10)
appears.
Fig. 9.10 Time Setting Failure Message
[5] Close button
Clicking this button closes the time setting window.