Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 110)

Teledyne LeCroy Timer
98 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
Right‐click in the blue space in the Global or Sequence State and New Event > Timer. 
Figure 5.47: Setting Global and Sequence State Timer Events
5.23.2 How to Start or Reset a Timer
You can Start or Reset the Timer in the Global State and in the Sequence State by
performing the following steps:
1. Open the Recording Rules page, select an event, and drag it to the Global State or
Sequence cells. For details on these steps (see “Events with Channels” on page 100) .
2. Right‐click on an event and select Specify Actions > Start Global Timer > Global
Timer A or Timer B from the menu (see Figure 5.48 on page 99 ).