5 error properties dialog, 6 dllp packet properties dialog – Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 98
Advertising
![background image](/manuals/353586/98/background.png)
Teledyne LeCroy
Properties Dialog Boxes for Events
86
Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.21.5
Error Properties Dialog
The Error Properties dialog lets you select specific error types for performing an action.
There are two sets of Error types: Packet Errors and Idle Errors.
Figure 5.32: Error Properties Dialog
5.21.6
DLLP Packet Properties Dialog
The DLLP Packet Properties dialog allows you to specify any DLLP field as shown below.
Figure 5.33: DLLP Packet Properties Dialog
Advertising