Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 240)

Teledyne LeCroy PCIe SSD Base Address Mapping
228 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
Click the Import Config Info button to import the configuration information as an .xml
file, instead of adding it individually. Click the hyper‐link XML Schema File Path to access
the required format to generate the .xml file. This schema provides the detailed format
for the imported file. All modern languages are equipped to generate an .xml file on a
specific xml schema. The driver software accepts this schema and generates the ,xml file
with all the required information.
Click the Export Config Info button to export the configuration information as an .xml file.
Click the Reset button to reset the values to the original values. Press the OK button to
save all the values.
10.23.2 PQI PCIe SSD Device Configuration
The PCIe SSD Configuration dialog is used to add missing information to decode the trace
without the configuration space and queue administration information. See
Figure 10.38
on page 229 for PQI PCIe SSD Device Configuration.
Prior to decoding if every thing is available in Configuration Space then Source equals
Config Space (see
Figure 10.38 on page 229 ).
Figure 10.38: PQI PCIe SSD Configuration Dialog Pre-decoding