Ag Leader GPS 2100 Operators Manual - Manual (Page 25)

GPS 2000/2100 Operation
Ag Leader Technology
Apri1998 3-7
On-Screen Map The following is a photo of the mark mode screen with the map option
activated. This is activated by pressing the setup key while in the mark
mode and then toggling the map on or off with the F1 key. The information
following the photo describes the setup options for generating the on screen
map.
Menu Option Description
MAP:ON Displays the current status of the mapping option. The
default setting is OFF.
RESCALE Adjusts the scale of the map to provide a best fit of the
logged data on the screen.
CLEAR MAP Erases the map that is being currently viewed from the
screen.
SET SCALE Allows the user to select the type of scaling to be used for
the map. The user has the following options: Span,
Rescale, Boundary, and Location.
Selecting a Map Scale To create a point map on the GPS 2000/2100 the user must select an
appropriate scale so that the map generated on the screen will be viewable at
all times. To do this the user must select a scale using the available options.
The following photo is of the SETUP SCALE screen:
From the MODE line the user can select one of the following choices to