Ag Leader GPS 2100 Operators Manual - Manual (Page 45)

GPS 2000/2100 Software
Ag Leader Technology
April 1998 4-1
GPS 2000/2100
Utilities Program This Ag Leader Technology program runs in Windows 3.1, Windows 95,
and Windows NT. It is a windows-based program with a user-friendly
interface. The program allows data transfer to and from the GPS 2000/2100
unit, and provides the capability to update unit programming easily.
System
Requirements To run the GPS 2000/2100 Utilities program the following minimum
requirements are necessary:
•
Windows 3.X, 95, or NT
•
386 or higher processor
•
4 MB of RAM
•
An unused nine-pin serial port
Installing the GPS
2000/2100 Utilities
Program The GPS 2000/2100 Utilities program is provided on a CD Rom. Insert the
CD into the drive and the autoplay will bring a window up. Click on
Install GPS 2000/2100 Utilities and follow the instructions. The following
is a basic set of instructions for installing the program on the three
supported operating systems when autoplay is not supported by a computer:
Windows 3.X
Installation Follow these steps to install the Utilities Program on a Windows 3.X
system:
Step Action
1 Insert the CD into the appropriate drive.
2 Start Windows.
3 Click on Main.
4 Click on File Manager.
5 Pick the appropriate drive.
6 Click on the GPS folder.
7 Click on Utilit folder
8 Double click on Setup.exe.
Windows 95,
Windows NT
Installation Follow these steps to install the Utilities Program on a Windows 95 or NT
system:
Step Action
1 Insert the CD into the appropriate drive.
2 Open My Computer.
3 Double-click on the icon for the CD Rom drive.
4 Click on Install GPS 2000/2100 Utilities.