Ag Leader GPS 2100 Operators Manual - Manual (Page 36)

Operation GPS 2000/2100
Ag Leader Technology
April 1998 3-18
1 Set the display to the standard mode
2 Press the SETUP key until EDIT FLD is above F2.
3 Press F2.
4 Use the directional arrow keys to select a field #.
5 Use the LEFT/RIGHT arrow keys to move the cursor next to
FIELD NAME:.
6 Use the directional arrow keys to enter the desired name.
7 Using the directional arrow keys position the cursor by DATA
TYPE:.
8 Press the UP/DOWN arrow keys to scroll through the available
data types.
Note: Data type names can not be edited on the GPS 2000/2100
screen, only selected from the 20 names in memory. To edit these
selections the GPS 2000/2100 Utilities program must be used, see
section 4, Software.
9 Press ENTER when done.
Another method of editing field names and data types is to use the GPS
2000/2100 Utilities program. This process is explained in section 4,
Software.
EDIT LOG
Select this option under the setup key to edit the variables that are included
in the ASCII string that is sent through the PC port when the unit is set in
the LOG EXT 2 mode.
EDIT FORM
Select this option under the setup key to choose which data format to use
for exporting data. The two choices are
•
The standard internal format that the GPS 2000/2100 uses. This format
includes all the specific data pertaining to a logged location. It is
necessary to download this format to convert the data to other formats
and for usage in future software packages.
•
Advanced Ag Leader format. This format is the same that is used for