Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 276)

Page 275
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
For two or more devices to be in the same MST region, they must have the same VLAN mapping, the same
configuration revision number, and the same name.
Example
The following example maps VLANs 10-20 to MST instance 1.
name (mst)
The name MST Configuration mode command defines the configuration name. Use the no form of this command
to return to the default setting.
Syntax
name string
no name
Parameters
•
string—MST configuration name. Case-sensitive (Range: 1-32 characters).
Default Configuration
The default name is a bridge ID.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
revision (mst)
The revision MST configuration command defines the configuration revision number. Use the no form of this
command to return to the default configuration.
Syntax
revision value
no revision
console(config)# spanning-tree mst configuration
console(config-mst)# instance 1 add vlan 10-20
console(config) # spanning-tree mst configuration
console(config-mst) # name region 1