Cuisipro 83-7441 Snap-Fit Robot Pop Molds Set of 6 - Manual

English
Snap Fit Sailboat Pop Mold
Moules à bâtonnets glacés en forme de
bateau à voile qui s’emboîtent
Juego de moldes para chupete de helado
en forma de velero, con sistema de
montaje a presión entre moldes
Segelboot-Eisformen mit
Schnappverschluss
Instructions
Fill molds to fill line or ½”/1cm from top with fruit 
juice, yogurt or ice cream
Insert sticks into mold 
Snap molds together 
Place filled molds into the freezer for 4-5 hours or 
until firm
Hold the pop by the stick, pull out gently squeezing 
the sides of the mold at the same time
Tips
If frozen treats do not unmold easily, run sides of 
molds under warm water for 5-7 seconds.
If using store-bought ice cream, soften at room 
temperature before filling molds.
Try using homemade ice cream and yogurt with the 
Donvier Ice Cream and Yogurt makers