2 output timing v, 4 extra frame delay, 0 video legalizer – AJA FS2 User Manual
Page 105
1
105
FS2 Installation and Operation Manual — VIDEO 1 and VIDEO 2 Menu Groups
15.2 Output
Timing V
This parameter adjusts Video Processor vertical output timing with reference to the
genlock source already selected. When adjusting the vertical timing (V), this
parameter specifies a number of lines to offset, moving the screen up to a half a frame
up or down.
Note: Output Timing Memory—Independent horizontal and vertical timing
values are kept for all available output formats.
15.4 Extra Frame
Delay
This parameter adjusts Video Processor output timing in 1 frame increments from 0 to
6 frames.
16.0 Video
Legalizer
This parameter determines the Video Legalizer mode. When set to Off, the Video
Legalizer is not enabled, and the following clip controls are not active. In YUV mode,
the White Clip, Black Clip, and Chroma Clip controls are enabled and clip any luma/
chroma that exceed the set limits. In RGB mode only the White Clip and Black Clip
controls are active and limit the R, G, and B values to those settings. RGB mode
requires the video to pass through the RGB Proc Amp to be converted to and from
RGB.
15.2 Output Timing V
Selections
Selection Descriptions
Variable
Adjustment range increments from half a frame up to a half a frame down
in single line increments. The maximum varies, depending on the
format already chosen.
Default: 0
15.4 Extra Frame Delay
Selections
Selection Descriptions
Variable
Adjustment output timing from 0 to 6 frames down in one frame
increments.
Default: 0
16.0 Video Legalizer
Selections
Selection Descriptions
Off (default)
YUV
RGB
Disables the Video Legalizer.
Enables the Video Legalizer to clip YUV to legal levels.
Enables the Video Legalizer to clip RGB to legal levels.