AJA FS2 - Manual (Page 33)

1
33 FS2 Installation and Operation Manual — Front Panel Description
Incompatibility
Alarms The FS2 produces signal incompatibility alarms for a number of reasons. The
following tables explain how to interpret the alarms.
Incompatible Video Formats
The table below shows conversions that the FS2 cannot do and which will cause
video format alarms to be generated. For information about the available formats
and general compatibility rules, see Appendix A Specifications.
Example Reference and Video Incompatibility Alarms
Video incompatibilities that the FS2 may detect include the following:
Input Incompatible Output Formats
525i59.94 1080p(&pSF)23.98
1080i59.94 1080p(&pSF)23.98
720p59.94 1080p(&pSF)23.98
1080p29.97 1080p(&pSF)23.98
1080pSF29.97 1080p(&pSF)23.98
625i60 1080p(&pSF)24
1080i60 1080p(&pSF)24
720p60 1080p(&pSF)24
1080p30 1080p(&pSF)24
Video Incompatibility Detected Alarm Status screen will show
Genlock Source is set to “Reference”, but no Reference
signal is detected. VID1 SDI 1 525i59.94
BKGD Matte
GEN Reference No Input
OUT 1080i59.94
Genlock Source signal format is not compatible with
selected Input Format. VID1 SDI 1 Incompat
BKGD Matte
GEN Reference Incompat
OUT 1080i59.94
Genlock Source signal format is not compatible with
selected Output Format. VID1 SDI 1 525i59.94
BKGD Matte
GEN Reference Incompat
OUT Incompat
Input signal is not compatible with selected Output
Format. VID1 SDI 1 Incompat
BKGD Matte
GEN Reference 1080i59.94
OUT Incompat