AJA FS2 - Manual (Page 175)

1
177 FS2 Installation and Operation Manual — Audio 1 and 2 Screens
Audio 1 and 2 Screens
The Audio 1 and Audio 2 browser screens display the audio control selections for the
audio inputs and outputs.
Audio Input Audio Input performs input audio source selection for the Audio Processor 1. Multiple
input sources may be present at all the connectors on the FS2 rear panel, but the
active input source routed through the FS2 will be the one selected here.
(1) Audio Input Selections Selection Descriptions
AES/EBU (default)
Analog
Embed SDI1
Embed SDI2
Embed Fiber1
Embed Fiber2
HDMI
Dolby Decode
Mute
Channel Map
Stereo Map
Selects the AES/EBU digital audio input (16-ch) as the input source.
Selects the Analog audio connector (DB25, 8-ch) as the input source.
Input channels 9-16 are set to Mute.
Uses the embedded audio from the SDI 1 video input as the input
source.
Uses the embedded audio from the SDI 2 video input as the input
source.
Uses the embedded audio from the optional Fiber 1 video input as
the input source.
Uses the embedded audio from the optional Fiber 2 video input as
the input source.
Uses the embedded audio from the HDMI video input (8-ch) as the
input source. Input channels 9-16 are set to Mute.
Selects the Dolby Decoder output as the audio processor input.
Sets all input channels to Mute.
For the 16 channels of audio input, selects inputs according to Audio
Map settings. Any of the 16 embedded channels can be mapped
to one of the 96 sources.
For the 16 channels of audio input, selects stereo inputs according to
Audio Map settings. Any channel pair (8 pair total) can be mapped
to 48 different choices.