AJA FS2 - Manual (Page 150)

152
Analog Audio
Out Analog Audio Out selects which group of channels (1–8 or 9–16) from which audio
processor output (1 or 2) will be sent to the Analog Audio output.
SDI1 3G Config The SDI1 3G Config parameter determines how 1080p50/60 signals are formatted
for the SDI 1 output. The first two choices select either "Level A” or "Level B” as
described in the SMPTE 425 standard. The third selection ties SDI 1 Out and SDI 2
Out together into a single 1.5 Gb Dual-link 1080p50/60 output. In this case, the SDI2
Video Out and SDI2 Audio Out selections are ignored.
SDI2 3G Config The SDI2 3G Config parameter determines how 1080p50/60 signals are formatted
for the SDI 2 output. The two choices select either "Level A” or "Level B” as described
in the SMPTE 425 standard. (If the SDI1 selection is Dual Link, these SDI2 settings are
ignored because the SDI 2 output is used for dual link.)
(8) Analog Audio Out Selections Selection Descriptions
Audio1 Ch1-8
(default)
Audio1 Ch9-16
Audio2 Ch1-8
Audio2 Ch9-16
Sends Audio Proc1 output Ch1-8 to the Analog Audio output.
Sends Audio Proc1 output Ch9-16 to the Analog Audio output.
Sends Audio Proc2 output Ch1-8 to the Analog Audio output.
Sends Audio Proc2 output Ch9-16 to the Analog Audio output.
(9.1) SDI1 3G Config Selections Selection Descriptions
3 Gb-Level A (default)
3 Gb Level-B
1.5 Gb Dual Link
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.
Formats SDI 1 and SDI 2 as 1.5Gb "Dual Link."
(9.2) SDI2 3G Config Selections Selection Descriptions
3 Gb-Level A (default)
3 Gb-Level B
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.