Metrohm 882 Compact IC plus – Anion – MCS - Manual (Page 26)

3.3 Installation diagram
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
882 Compact IC plus – Anion – MCS
3 MSM eluent input capillary
Labeled with in. 4 MSM eluent output capillary
Labeled with out.
5 Detector input capillary
Mounted on the front of the detector. 6 Detector output capillary
Mounted on the rear of the detector.
7 Regeneration solution aspiration capil-
lary (6.1803.020) 8 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the regen-
eration solution.
9 MSM regeneration solution input capil-
lary
Labeled with regenerant. 10 MSM regeneration solution output
capillary
Labeled with waste reg.
11 Rinsing solution aspiration capillary
(6.1803.020)
12 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the rinsing
solution.
13 MSM rinsing solution input capillary
Labeled with rinsing solution.
14 MSM rinsing solution output capillary
Labeled with Waste rins.
15 MCS aspirating capillary
For aspirating air low in CO
2
out of the CO
2
adsorption cartridge.
16 Sample aspiration capillary
(6.1803.040)
Connected to the injection valve.
17 Sample output capillary (6.1803.040)
Connected to the injection valve.
18 PEEK pressure screw, short
(6.2744.070)
19 Tubing olive (6.2744.034)
For connecting capillaries to the aspiration
side of the peristaltic pump.
20 Pump tube connection (6.2744.180)
With safety device and filter, for connecting
capillaries to the outlet side of the peristaltic
pump.
21 PEEK pressure screw, long
(6.2744.090)
22 Luer coupling (6.2744.120)
Mounted to the MCS with a short pressure
screw (6.2744.070) (3-
15 ) and connected
to the CO
2
adsorption cartridge.