Metrohm 882 Compact IC plus – Anion – MCS - Manual (Page 34)

3.7 Capillary and cable feed-throughs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24 ￭￭￭￭￭￭￭￭
882 Compact IC plus – Anion – MCS
1
2
3
1
2
3
6
7
4
5
Figure 7 Capillary and cable feed-throughs
1 Capillary feed-through
For feeding capillaries from the front to the
rear of the instrument. 2 Capillary feed-through
Fro feeding capillaries from the front to the
right side of the instrument.
3 Capillary feed-through
For feeding capillaries from the front to the
left side of the instrument. 4 Luer connector
For connecting a (6.2816.020) syringe. For
manual sample feeding.
5 Capillary feed-through
At the door of the instrument. For feeding
capillaries out of the instrument. 6 Capillary feed-through
At the rear of the instrument. For feeding
capillaries out of the detector chamber.
7 Cable feed-through
At the rear of the instrument. For feeding
the detector cable out of the detector cham-
ber.
Do not feed capillaries through the Luer connectors (7-4). The capillaries
are fastened with PEEK pressure screws (6.2744.070) from inside to the
Luer connector. From outside, liquid can be aspirated or injected with a
syringe.