Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 15)

Selecting Analytes
User Guide | 13
Selecting Analytes
After you select the assay panel you want to use in your experiment, you select the
analytes you are interested in.
To select an analyte
1. From the protocol dialog box, click Select Analytes.
2. From the Assay Panel dropdown list, select an assay panel.
3. Click the checkboxes to select the analytes to include in your protocol or click
Select All to select all analytes.
4. Click OK.
The following figure shows the MAGPIX Quick Start assay panel with analytes in
regions 20, 21, and 25 through 27 selected.