Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 71)

Responding to a Failed Routine
User Guide | 69
Status also shows the current status of the routine with the following symbols:
Symbol Description
This routine is current and up to date.
This routine is not current or the routine failed.
The Shut Down routine is in one of two states:
 It has either never been run since the software was
installed.
 It has not been run in the current day. This is a
reminder to run the Shut Down routine at the end of
the day before you turn the instrument off.
If the Calibration, Verification, or Fluidics routines display the hourglass icon, then
run all routines in the Recommended Routine section. Once the routine is
successfully completed, the routines in the Status pane will display as current.
If the Shut Down routine displays the hourglass icon, then run the Shut Down
routine before running any recommended routines.
Responding to a Failed Routine
A routine may fail due to instrument problems or user error. When failure occurs,
follow the instructions in any messages that appear and perform the recommended
routines.