Dell PowerVault TL1000 - Manual (Page 92)

Click Submit to transfer the settings to the library. A dialog message is displayed
when the settings are updated successfully.
Click Refresh to read the current settings from the library.
Configuring physical library settings
Select Configure Library > Physical to configure the I/O station and auto
cleaning.
Configure the I/O station and auto cleaning cartridge slot assignment with the
following settings:
v Library name - Use to enter a name for your library.
v Auto cleaning - Use to enable automatic cleaning of the tape drive. Auto
cleaning can be enabled only when there the number of active slots is less than
the total number of available slots in the library.
v Bar code label length - Use to choose the number of characters in the cartridge
bar code that is reported to the host computer.
Click Submit to transfer the settings to the library. A dialog message is displayed
when the settings are updated successfully.
Click Refresh to read the current settings from the library.
Configuring logical library settings
Select Configure Library > Logical to configure the library access mode for the
logical library and the number of active cartridge slots.
Configure the library access mode with the following settings:
v Library mode - The library mode can be set to Random or Sequential.
– Random - In random mode, the library allows the server's (host's) application
software to select any data cartridge in any order.
a29z0123
Figure 4-38. Physical library settings screen
a29z0124
Figure 4-39. Logical library settings screen
4-24 Dell PowerVault TL1000 Tape Autoloader User's Guide