Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c - Manual (Page 70)

Technical details
Operating Manual PNOZ s30
1001715-EN-13
70
Times 750330 751330
Switch delay (selectable) 0 - 30 s 0 - 30 s
Delay on the select inputs (selecta-
ble)
0 - 30 s 0 - 30 s
Start-up delay (selectable) 0 - 600 s 0 - 600 s
Environmental data 750330 751330
Climatic suitability EN 60068-2-78 EN 60068-2-78
Ambient temperature
Temperature range -20 - 55 °C -20 - 55 °C
Storage temperature
Temperature range -40 - 85 °C -40 - 85 °C
EMC EN 60947-5-1, EN 61000-6-2, EN
61000-6-3
EN 60947-5-1, EN 61000-6-2, EN
61000-6-3
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 55,0 Hz 10,0 - 55,0 Hz
Max. amplitude 0,35 mm 0,35 mm
Airgap creepage
In accordance with the standard EN 60947-1 EN 60947-1
Overvoltage category II II
Pollution degree 2 2
Rated insulation voltage 250 V 250 V
Rated impulse withstand voltage 4,00 kV 4,00 kV
Protection type
Mounting (e.g. cabinet) IP54 IP54
Housing IP30 IP30
Terminals IP20 IP20
Mechanical data 750330 751330
Mounting position Horizontal on top hat rail Horizontal on top hat rail
Mechanical life 10,000,000 cycles 10,000,000 cycles
Material
Bottom PC PC
Front PC PC
Top PC PC
Cross section of external conduc-
tors with screw terminals
1 core flexible 0,25 - 2,50 mm², 24 - 12 AWG –
2 core with the same cross sec-
tion, flexible with crimp connec-
tors, no plastic sleeve
0,25 - 1,00 mm², 24 - 16 AWG –
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,20 - 1,50 mm², 24 - 16 AWG –
Torque setting with screw terminals 0,50 Nm –
Connection type Screw terminal Spring-loaded terminal
Mounting type plug in plug in