Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c - Manual (Page 83)

Supplementary data
Operating Manual PNOZ s30
1001715-EN-13
83
Examples
Connection of proximity switch
Features
PNOZ s30
} Standstill monitoring for enabling the safety gate via Rel. 1:
Standstill is detected at <= 2 Hz, the output Rel. 1 switches on and the safety gate can
be released with the pushbutton S3.
} Monitoring for overspeed via Rel. 2:
Overspeed is detected at >= 500 Hz and the output Rel. 2 switches off.
} Feedback loop monitoring for Rel.1 via feedback loop input Y1,
Feedback loop monitoring for Rel.2 via feedback loop input Y2
} Automatic reset
Encoder
The measured values are detected by two proximity switches (pnp).
PNOZ s4
} Safety gate monitoring
Configuration overview
9.3
9.3.1
9.3.1.1
9.3.1.2