Pilz P1HZ X1 24VDC 2n/o User Manual
Pilz Sensors
![background image](/manuals/647304/1/background.png)
- 1 -
Sicherheitsbestimmungen
• Das Gerät darf nur von Personen
installiert und in Betrieb genommen
werden, die mit dieser Betriebsanleitung
und den geltenden Vorschriften über
Arbeitssicherheit und Unfallverhütung
vertraut sind. Beachten Sie die VDE-
sowie die örtlichen Vorschriften, insbeson-
dere hinsichtlich der Schutzmaßnahmen.
• Beim Transport, bei der Lagerung und im
Betrieb die Bedingungen nach EN 60068-
2-6 einhalten (s. techn. Daten).
• Durch Öffnen des Gehäuses oder eigen-
mächtige Umbauten erlischt die Gewähr-
leistung.
• Montieren Sie das Gerät in einen
Schaltschrank; Staub und Feuchtigkeit
können sonst zu Beeinträchtigungen der
Funktionen führen.
• Sorgen Sie an allen Ausgangskontakten
bei kapazitiven und induktiven Lasten für
eine ausreichende Schutzbeschaltung.
• Das Gerät darf nur wie in den Anschluss-
beispielen im Kapitel "Anwendung"
angeschlossen werden.
• Die Bedienungsanleitung dient der
Instruktion und ist für künftige Verwen-
dung aufzubewahren.
Bestimmungsgemäße Verwendung
Das Gerät erfüllt die Anforderung Typ III A
nach EN 574.
ACHTUNG!
Das P1HZ X1 darf nicht in Pressen-
steuerungen eingesetzt werden. Hierfür
empfehlen wir die Zweihandbedienungsrelais
P2HZ X1 und P2HZ X1P. Es ist nur für den
Einsatz bei einer durch die Risikoanalyse
ermittelten geringen Gefährdung geeignet
(z. B. PL c (Cat. 1) nach EN ISO 13849-1).
Das Zweihandbedienungsrelais P1HZ X1
dient als Handschutzeinrichtung Typ IIIA
nach EN 574 an Maschinen bzw. Anlagen.
Das Gerät zwingt den Bediener die Hände
während gefahrbringender Bewegungen
außerhalb des Gefahrenbereichs zu halten.
Das P1HZ X1 ist bestimmt für den Einsatz in
Zweihandschaltungen. Beachten Sie dabei
die Typenangabe der Zweihandschaltung
aus der entsprechenden C-Norm.
Als nicht bestimmungsgemäß gilt insbeson-
dere:
• jegliche bauliche, technische oder
elektrische Veränderung eines Produkts,
• der Einsatz eines Produkts außerhalb der
Bereiche, die in der Produktdokumentation
beschrieben sind,
• ein von den dokumentierten technischen
Daten abweichender Einsatz.
Conseils préliminaires
• La mise en oeuvre de l'appareil doit être
effectuée par une personne spécialisée en
installations électriques, en tenant compte
des prescriptions des différentes normes
applicables (NF, EN, VDE..), notamment
au niveau des risques encourus en cas
de défaillance de l'équipement électrique.
• Respecter les exigences de la norme
EN 60068-2-6 lors du transport, du
stockage et de l’utilisation de l’appareil.
• Toutes interventions sur le boîtier
(ouverture du relais, échange ou
modification de composants, soudure
etc..) faites par l'utilisateur annulent la
garantie.
• Montez l'appareil dans une armoire
électrique à l'abri de l'humidité et de la
poussière.
• Assurez-vous du pouvoir de coupure des
contacts de sortie en cas de charges
inductives ou capacitives.
• Le relais de commande bimanuelle doit
être câblé que comme indiqué dans le
paragraphe "Utilisation".
• Ce manuel d'utilisation est nécessaire à la
mise en service du matériel et doit être
conservé pour des applications futures.
Domaines d'utilisation
L'appareil répond aux exigences de la
norme EN 574 pour les relais de type III A.
Attention !
Le relais P1HZ X1 n’est pas adapté pour
les circuits de commande des presses.
Nous vous conseillons, dans ce cas,
l’utilisation des relais P2HZ X1 et P2HZ X1P.
Il n'est adapté que pour les circuits dont la
catégorie de risque est faible (PL c (Cat. 1)
selon EN ISO 13849-1).
Le relais de commande à deux mains
P1HZ X1 est un dispositif de sécurité de
type III A d'apres EN 574 pour les machines
de installations. L'appareil protége
l'opérateur contre les risques de blessure
en l'obligeant à avoir les 2 mains hors de la
zone dangereuse de la machine. Le P1HZ
X1 peut être utilisé comme relais de
commande bimanuelle. Vérifer le type de la
commande bimanuelle à installer suivant les
différentes normes C.
Est en particulier considéré comme non
conforme :
• toute modification structurelle, technique
ou électrique d'un produit
• I'utilisation d'un produit dans des
applications autres que celles décrites
dans la documentation des produits
• une utilisation autre que celle spécifiée
dans les caractéristiques techniques.
Safety regulations
• The unit may only be installed and
operated by personnel who are familiar
with both these instructions and the
current regulations for safety at work and
accident prevention. Follow local
regulations especially as regards
preventative measures.
• Transport, storage and operating
conditions should all conform to
EN 60068-2-6.
• Any guarantee is void following opening of
the housing or unauthorised modifications.
• The unit should be panel mounted,
otherwise dampness or dust could lead to
functional impairment.
• Adequate protection must be provided on
all output contacts with capacitive and
inductive loads.
• The unit may only be connected as
shown in the examples in the section
"Application"
• This operating manual should be retained
for future reference.
Intended use
The unit fulfils the requirements to EN 574,
Type III A.
CAUTION!
The P1HZ X1 is not for use as a two-hand
relay for press control. We recommend the
two-hand control relays P2HZ X1 and P2HZ
X1P as the primary device for presses. It has
been designed for use where the risk of
danger is limited, determined through detailed
risk analysis (e.g. PL c (Cat. 1) in
accordance with EN ISO 13849-1).
The two-hand control relay P1HZ X1 serves
as a hand protection device Type IIIA on
machinery and plants. The 2-hand control
guides and keeps the operator’s hands
away from the danger zone during
hazardous movements. The P1HZ X1 is for
use in 2-hand control circuits.
Follow type details for the 2-hand relay from
the corresponding C standard.
The following is deemed improper use in
particular:
• Any component, technical oder electrical
modification to a product
• Use of a product outside the areas
described in the product documentation
• Any use that is not in accordance with the
documented technical details.
20067-3FR-05
P1HZ X1 (Typ III A, EN 574)
4
D
Betriebsanleitung
4
GB Operating instructions
4
F
Manuel d'utilisation
- PSEN in1p
- PSEN in1n
- PSEN rs2.0-300
- PSEN rs2.0-300
- PSEN rs1.0-175
- PSEN enc m1 eCAM
- PSENme 1S / 1AS
- PSENme 1S / 1AS
- PSENme 2 / 2A
- PSENme 4 / 4A
- PSEN 1.2p-23/PSEN 1.2-20/8mm/ATEX/ 1unit
- PSEN 1.1a-20/PSEN 1.1-20 /8mm/5m/1unit
- PSEN 1.1-10 / 1 actuator
- PSEN 1.2p-25/PSEN 1.2-20/8mm/ATEX/ix1
- PSEN 1.1a-22/PSEN 1.1-20 /8mm/5m/ix1/1un
- PNOZ m EF 2MM
- PNOZ m EF 2MM
- PSEN 1.1b-23/PSEN1.1-20/8mm/10m/EX/1unit
- PSEN 1.1-10 / 1 actuator
- PSEN 1.1p-20/PSEN 1.1-20/8mm/ 1unit
- PSEN 1.1p-29/PSEN 1.1-20/7mm/ix1/ 1unit
- PSEN 1.1b-25/PSEN1.1-20/8mm/10m/EX/1unit
- PSEN 1.1-10 / 1 actuator
- PSEN 1.1p-22/PSEN 1.1-20/8mm/ix1/ 1unit
- PSEN 1.1-10 / 1 actuator
- PSEN 1.2p-20/PSEN 1.2-20/8mm/ 1unit
- PNOZ m EF 2MM
- PSEN 1.1p-23/PSEN 1.1-20/8mm/ATEX/ 1unit
- PSEN 1.2p-22/PSEN 1.2-20/8mm/ix1/ 1unit
- PNOZ m EF 2MM
- PSEN 1.1p-25/PSEN 1.1-20/8mm/ATEX/ix1
- PSEN 1.1-10 / 1 actuator
- PSEN ma1.3a-20/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.3a-22/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.3b-23/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.3b-25/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.3p-20/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.3p-22/PSEN ma1.3-08/8mm/ix1/1un
- PSEN ma1.3-20 M12/8-0.15m 1switch
- PSEN ma1.3n-20/PSEN ma1.3-08/8mm/1unit
- PSEN ma1.4p-52/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.4p-51/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.4n-51/ 1switch
- PSEN ma1.4n-50/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.4-51 M12/8-0.15m 1switch
- PSEN ma1.4p-57/PSEN ma1.4-10mm/ 1unit
- PSEN ma1.4a-52/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.4a-51/PSEN ma1.4-10mm/ 1unit
- PSEN ma1.4p-50/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.4a-57/PSEN ma1.4-10mm/ 1unit
- PSEN ma1.4a-50/PSEN ma1.4-03mm/ 1unit
- PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
- PSEN 2.1p-24/PSEN2.1-20/8mm/LED/EX/1unit
- PSEN 2.2p-24/PSEN2.2-20/LED/8mm/ATEX
- PSEN ma2.1p-34/6mm/LED/ATEX 1switch
- PSEN ma2.1p-31/PSEN2.1-10/LED/6mm/1unit
- PSEN ma1.1p-12/PSEN1.1-10/3mm/ix1/1unit
- PSEN ma1.1p-10/PSEN1.1-10/3mm/1unit
- PSEN i1 Interface for 4 PSEN 2
- PSEN ix1 Interface for 4 PSEN 1
- PSEN cs3.1n 1switch
- PSEN cs1.1p
- PSEN cs1.1 1 actuator
- PSEN cs1.1n
- PSEN cs4.1 M12/8-0.15m
- PSEN cs3.1 M12/8-0.15m
- PSEN cs2.1n
- PSEN cs4.1n 1switch
- PSEN cs2.1p
- PSEN cs2.1p
- PSEN cs1.13p
- PSEN cs4.2n
- PSEN cs2.13p ATEX
- PSEN cs4.1 M12/8-0.15m
- PSEN cs1.19n 1 switch
- PSEN cs4.2 M12/8-0.15m
- PSEN cs4.2 M12/8-0.15m
- PSEN b1
- PSEN b3
- PSEN b3
- PSEN hs1.1p
- PSEN sl-0.5p 1.1
- PSEN sl-0.5n 2.1
- PSEN sl-1.0p 1.1
- PSEN sl-1.0 1unit
- PSEN sl restart interlock (padlock)
- PSEN op2S-1-1
- PSEN op2H-s-30-015/1
- PSEN op4B-T-2-050
- PSEN op4F-s-14-015/1
- PSEN op4H-A-30-030/1
- PSEN op1.3 Reflex pnp no/nc M12
- PSEN op bracket turnable (kit)
- PSEN op Mirror-165/1
- PSEN op Protective Column-060/1
- PSEN op Protective Column-060/1
- PSEN op Advanced Programming Adapter
- PSENvip RL D Set
- PSENvip RL D Set
- PSENvip RL D Set
- PLID d1
- PMD s10 24-240VACDC
- PMD s20 24-240VAC/DC 10-200k / 2U
- S1SW P 24-240VACDC UM 0-690VAC/DC
- S1UM 24VAC/DC UM 0.1-500VAC/DC
- S1UM 24VAC/DC UM 0.1-500VAC/DC
- PNOZ m EF 2MM
- PNOZ m EF 2MM
- PNOZ m EF 2MM
- S3UM 24VDC UM 42VAC
- S3UM 24VAC UM 208/400/480VAC
- S1MN Ex 24VAC/DC 2c/o
- S1MN 400VAC 2c/o
- S1MO 24VAC/DC 2c/o
- S1MO Ex 24VAC/DC 2c/o
- S1MS Ex 48VAC 2c/o
- S1MS 400VAC 2c/o
- S1EN 50KOhm 24-240VAC/DC
- S1WP 9A 24VDC UM 0-120VAC/DC
- S1WP 9A 24VDC UM 0-120VAC/DC
- S1PN 200-240VAC 2c/o
- P3WP3P C/10A/230VAC
- PNOZ s1 24VDC 2 n/o
- PNOZ s2 24VDC 3 n/o 1 n/c
- PNOZ s3 24VDC 2 n/o
- PNOZ s4 24VDC 3 n/o 1 n/c
- PNOZ s4 24VDC 3 n/o 1 n/c
- PNOZ s4.1 24VDC 3 n/o 1 n/c
- PNOZ s6 24VDC 3 n/o 1 n/c
- PNOZ s6.1 24VDC 3 n/o 1 n/c
- PNOZ s30 C 24-240VACDC 2 n/o 2 n/c
- PNOZ s50 C
- PNOZ s5 24VDC 2 n/o 2 n/o t
- PNOZ s9 24VDC 3 n/o 1 n/c t
- PNOZ s7 24VDC 4 n/o 1 n/c
- PNOZ s8 24VDC 2 n/o
- PNOZ s10 24VDC 4 n/o 1 n/c
- PNOZ s11 24VDC 8 n/o 1 n/c
- PNOZ s7.1 24VDC 3 n/o 1 n/c cascade
- PNOZ s7.2 24VDC 4 n/o 1 n/c expand
- PNOZ s22 24VDC 2 x 3 n/o 1 n/c
- PNOZ s pIE
- PNKL 24VAC/24VDC
- PST 4 24 V DC 6N/O 4N/C
- PNOZ 10 24VAC 6n/o 4n/c
- PNOZ 2VQ 24VDC 3n/o 1n/c 2n/o t
- PNOZ X7 48VAC 2n/o
- PNOZ 15 24VDC 3n/o 1n/o 1n/c
- PNOZ X7.1 24VAC/DC 1n/o 1n/c
- PNOZ 11 24VAC 24VDC 7n/o 1n/c
- PNOZ EX 230VAC 3n/o 1n/c
- PNOZ EX 230VAC 3n/o 1n/c
- PNOZ EX 230VAC 3n/o 1n/c
- PNOZ X1 24VAC/DC 3n/o 1n/c
- PNOZ X2 24VAC/DC 2n/o
- PNOZ X2C 24VAC/DC 2n/o
- PNOZ X3.2 230VAC 24VDC 3n/o 1n/c 1so
- PNOZ X3 24VAC 24VDC 3n/o 1n/c 1so
- PNOZ X3.1 230VAC 24VDC 3n/o 1n/c 1so
- PNOZ X5J 24VDC 2n/o
- PNOZ X13 24VDC 5n/o 1n/c
- PNOZ XHCV 0,7/24VDC 2n/o fix
- PNOZ X9 42VAC 24VDC 7n/o 2n/c 2so
- PNOZ X10 24VAC 6n/o 4n/c 3LED
- PNOZ X6 42VAC 3n/o
- PNOZ X4 24VDC 3n/o 1n/c
- PNOZ X10.1 24 VAC 6n/o 4n/c 6LED
- PNOZ V 3s 24VDC 3n/o 1n/c 1n/o t
- PNOZ X7P 110-120VAC 2n/o
- PNOZ X11P 24VAC 24VDC 7n/o 1n/c 2so
- PNOZ X1P 24VDC 3n/o 1n/c
- PNOZ X2.9P 24VDC 3n/o 1n/c
- PNOZ X2.8P 24VACDC 3n/o 1n/c
- PNOZ X2.8P 24VACDC 3n/o 1n/c
- PNOZ X2P 24VACDC 2n/o
- PNOZ X2.3P 24VACDC 3n/o
- PNOZ X2.5P 24VDC 2n/o 1so
- PNOZ X3P 24VDC 24VAC 3n/o 1n/c 1so
- PNOZ X3P 24VDC 24VAC 3n/o 1n/c 1so
- PNOZ X3.10P 24VACDC 3n/o 1n/c 1so
- PNOZ X9P 24DC 24-240VACDC 7no 2nc 2so
- PNOZ X9P 24DC 24-240VACDC 7no 2nc 2so
- PNOZ X10.11P 24VDC 6n/o 4n/c 6LED
- PNOZ X8P 24 VDC 3n/o 2n/c 2so
- PNOZ 2 24VAC 3n/o 1n/c
- PNOZ 8 230VAC 3n/o 1n/c 2so
- PNOZ 16SP 24VAC 24VDC 2n/o
- P2HZ X1 24VAC 3n/o 1n/c
- P2HZ X3 24VDC 2n/o 1n/c
- P2HZ X1P 24VAC 3n/o 1n/c 2so
- P2HZ X1.10P 24VDC 3n/o 1n/c 2so
- P2HZ X4P 24VAC 3n/o 1n/c
- PNOZ 16 240VAC 24VDC 2n/o
- PSWZ X1P C 0,0075-0,5V/24-240VACDC
- PSWZ X1P C 0,0075-0,5V/24-240VACDC
- PU3Z 24VAC/DC 3n/o 1n/c 6so
- PZW 3/230VAC 1n/o 2n/c
- PZA 3/24VDC 1n/o 2n/c
- PNOZ X2.4V 1/24VDC 4n/o 1so fix
- PNOZ XV2.1P C 300/24-240VACDC 2n/o 2n/o
- PNOZ XV2.1P C 300/24-240VACDC 2n/o 2n/o
- PNOZ XV2.1P C 300/24-240VACDC 2n/o 2n/o
- PNOZ XV3.1 300/24-240VACDC 3no 1nc 2no t
- PNOZ XV3 300/24VDC 3n/o 2n/o t
- PNOZ XV2P C 0.5/24VDC 2n/o 2n/o fix
- PNOZ XV3P C 300/24VDC 3n/o 2n/o t
- PNOZ XV3.3P C 30/24VDC 3n/o 2n/o t
- PNOZ X2.1VP C 0.75/24VDC 1so 2n/o fix
- PNOZ XV3.1P C300/24-240VACDC 3no 1nc 2no
- PNOZ XV1P C 30/24VDC 2n/o 1n/o t
- PZE 9 24VDC 8n/o 1n/c
- PMUT X1P C 24VDC 3n/o 1n/c 5so
- PZE X4V 0,7/24VDC 4n/o fix
- PZE X4V 0,7/24VDC 4n/o fix
- PZE X4 24VDC 4n/o
- PZE X4V 8/24VDC 4n/o
- PZE X4V 8/24VDC 4n/o
- PZE X5 24VDC 5n/o
- PZE 9P 24VACDC 24-240VACDC 8n/o 1n/c
- PZE 9P 24VACDC 24-240VACDC 8n/o 1n/c
- PZE X5P 24VDC 5n/o 2so
- PZE X4P 24VDC 4n/o
- PZE X4VP 3/24VDC 4n/o fix
- PZE X4P 24VDC 4n/o
- PZE X4VP8 24VDC 4n/o
- PZE X4VP8 24VDC 4n/o
- PNOZ c1 24VDC 3n/o 1n/c
- PNOZ e1.1p C 24VDC 2so
- PNOZ e4vp C 10/24VDC 1so 1so t
- PNOZ e3.1p C 24VDC 2so
- PNOZ e3.1p C 24VDC 2so
- PNOZ e1vp C 300/24VDC 1so 1so t
- PNOZ e3vp C 300/24VDC 1so 1so t
- PNOZ e8.1p C 24VDC 2so
- PNOZ e8.1p C 24VDC 2so
- PNOZ e8.1p C 24VDC 2so
- PNOZ e6.1p C 24VDC 4n/o 2so
- PNOZ e6vp C 24VDC 4n/o 1so 1so t
- PNOZ e2.1p C 24VDC 2so
- PNOZ e2.1p C 24VDC 2so
- PNOZ e4vp C 10/24VDC 1so 1so t
- PNOZ e4vp C 10/24VDC 1so 1so t
- PNOZ c2 24VDC 2n/o
- PNOZ e7p C 24VDC 2 so
- PNOZ p1p 24VDC 2so
- PNOZ p1vp 300s
- PNOZ po3.1p 8n/o
- PNOZ po3.2p 4n/o
- PNOZ po3.3p 3n/o
- PNOZ po4p 4n/o
- PNOZ pps1p 100-240VAC
- PNOZ pe1p
- PNOZpe2p Bus-Interface
- PNOZ mm0.2p
- PNOZ mm0.2p
- PNOZ mm0.2p
- PNOZ mc6.1p CANopen 3
- PNOZ mm0p-T
- PNOZ mml1p
- PNOZ mml2p
- PNOZ mmc1p ETH
- PNOZ m1p ETH coated version
- PNOZ m1p ETH coated version
- PNOZ m1p ETH coated version
- PNOZ m1p ETH coated version
- PNOZ m1p ETH coated version
- PNOZ m0p ETH
- PNOZ mmc2p seriell
- PNOZ mmc7p CC
- PNOZ mmc4p DN
- PNOZ mmc4p DN
- PNOZ mmc3p DP
- PNOZ mi1p 8 input coated version
- PNOZ mo1p 4so coated version
- PNOZ mi2p 8 standard input
- PNOZ mi2p 8 standard input
- PNOZ mo2p 2n/o coated version
- PNOZ mo5p 4 n/o burner
- PNOZ mo4p 4n/o coated version
- PNOZ ml1p coated version
- PNOZ ml2p safe link PDP
- PNOZ ms2p TTL
- PNOZ ms2p TTL
- PNOZ ms2p TTL
- PNOZ ma1p coated version
- PNOZ ms3p standstill / speed monitor
- PNOZms2p HTL
- PNOZ ms3p HTL
- PNOZ ms3p TTL
- PNOZ mc1p coated version
- PNOZ mc0p Powersupply
- PNOZ mc5p Interbus
- PNOZ mc7p CC-Link 2
- PNOZ mc6.1p CANopen 3
- PNOZ mc6.1p CANopen 3
- PNOZmc5.1p Interbus LWL / Fiberoptic
- PNOZ mc4p DeviceNet 2
- PNOZ mc8p coated version
- PNOZ mc9p Profinet IO
- PNOZ mc3p Profibus 2
- PNOZ mc2.1p EtherCAT 2
- PNOZ mc10p SERCOS III
- PNOZ mmc11p CAT
- PSEN im1
- PNOZ msi1AP Adapter Si/Ha 25/25 5m
- PNOZ msi 9p adapter cable 5m
- PNOZ MSI6P ADAPTER ELAU 9/9 4 m
- PNOZ msi16p ADAPTER Baumuell 15/15 2,5m
- PNOZ msi16p ADAPTER Baumuell 15/15 2,5m
- PNOZ msi8p Adapter Lenze 9/9 1,5m
- PNOZ msi b4 Box
- PNOZ msi7p Adapter SEW 15/15 1,5m
- PNOZ MSI20P PARKER HD 15/15 2,5M
- PNOZ MSI20P PARKER HD 15/15 2,5M
- PNOZ MSI20P PARKER HD 15/15 2,5M
- PNOZ msi13p Fanuc 20/20 2,5m
- PNOZ msi S025
- PNOZ msi15p Adapter Tendo 15/15 2,5m
- PNOZ msi 17p Bos/Rex 15/15 4,0m
- PNOZ msi b1 Box 25p
- PNOZ msi b1 cable 25/RJ45
- PNOZ MSI19P ADAPTER ELAU PACDrive3 1,5m
- MM A MINI-IO-CAB01 1.5M
- PNOZ ms4p speedcontrol
- PNOZ mc12p Powerlink
- PNOZ m EF 16DI
- PNOZ m ES RS232
- PNOZ m B0
- PNOZ m EF 1MM
- PNOZ m EF 1MM
- PNOZ m EF PDP Link
- PNOZ m EF 2MM
- PNOZ m EF 8DI4DO
- PNOZ m EF 4DI4DOR
- PNOZ m EF Multi Link
- PNOZ m ES CANopen
- PNOZ m ES ETH
- PNOZ m ES EtherCAT
- PNOZ m ES Profibus
- PNOZ m ES RS232
- PSS SB DI 16 TERMINALS S/LOADED
- PSS SB DI 16 TERMINALS S/LOADED
- PNOZ m ES Powerlink
- PSSu H m F DP SN SD
- PSSu H m F DP SN SD
- PSSu H FS SN SD-R
- PSSu H m F DP SN SD
- PSSu H m F DP SN SD
- PSSu H FS SN SD-R
- PSSu H S PN
- PSSu H m F DP SN SD
- PSSu H SB-T
- PSSu H DP-T
- PSSu H DN-T
- PSSu H CAN-T
- PSSu H SB CAN-T
- PSSu H SB DN-T
- PSSu H SB CAN-T
- PSSu H SB IBSo
- PSSu H SB DN-T
- PSSu H F PN o
- PSSu H F PN
- PSSu E F 4DI-R
- PSSu E F 4DO 0.5-R
- PSSu E F 2DO 2-R
- PSSu E F 2DOR 8-R
- PSSu E F DI OZ 2-R
- PSSu E F BSW-T
- PSSu E F AI I-R
- PSSu E F ABS SSI-T
- PSSu E F AI U-R
- PSSu E F INC-T
- PSSu E AI SHT1-T
- PSSu K F INC
- PSSu E F 2DI 60-R
- PSSu K F FCU
- PSSu E AI SHT2
- PSSu E S 2DO 2-TD
- PSSu E S 2DO 2-TD
- PSSu E S 2DO 2-TD
- PSSu E S 4DO 0.5-T
- PSSu E S 4DI-T
- PSSu K S 8DI 8DO 0.5
- PSSu K S 16DI
- PSSu K S 16DO 0.5
- PSSu E S 2AI I se-T
- PSSu E S 2AI I se-T
- PSSu E S 2AI I se-T
- PSSu E S 2AO U-T
- PSSu E S 4AO U-T
- PSSu E S 2AO I-T
- PSSu E S INC-T
- PSSu E S ABS SSI-T
- PSSu E S 2AI TC-T
- PSSu E S 2AI TC-T
- PSSu E S 2DOR 10-T
- PSSu E S 2DOR 2-T
- PSSu E S 2DO 2-T
- PSSu E S 4DI-D
- PSSu E S RS485-T
- PSSu E S RS232
- PSSu K S RS232 Modbus ASCII
- PSSu K S RS232
- PSSu E S INC 24V se -T
- PSSu E F PS-P-R
- PSSu E F PS1-T
- PSSu E F PS1-T
- PSSu E PD-T
- PSSu E PD1-T
- PSSu E PS-P 5V
- PSSu E PS-P +/-15V
- PSSu E PS-P +/-10V
- PSSu XR F -T
- PSSu XB F -T
- PSSu E F PS2-T
- PDP67 F 8DI ION VA
- PSS67 F 16DI SB-T
- PDP67 Connector cs VA
- PDP67 F 4 code VA
- PDP67 F 8DI ION HP VA
- PDP20 F 4 mag