EVCO EVB1256N9D User Manual
Page 6
EVCO S.p.A.
EVBOX1 | Installation guide ver. 1.3 | Code 144BOX1E134
page 6 of 92
load 5 (default to condenser fan) (3)
8 A
8 A
8 A
8 A
8 A
8 A
load 6 (default to alarm ) (3)
8 A
8 A
8 A
8 A
8 A
8 A
Communication ports
RS-485 MODBUS for other EVCO products
•
•
•
•
•
•
•
•
Other characteristics
clock
•
•
•
•
alarm buzzer
•
•
•
•
•
•
•
•
three-phase defrost elements management
•
•
integrated driver for unipolar stepper electronic expansion valves.
•
•
operation at low and high relative humidity percentages
•
•
•
•
•
•
•
•
overheated condenser alarm management
•
•
•
•
•
•
•
•
defrosting adaptive management
•
•
•
•
•
•
•
•
"HACCP" function
•
•
•
•
"energy saving" function
•
•
•
•
•
•
•
•
"rapid cooling" function
•
•
•
•
•
•
•
•
Notes
(1)
can be set through a configuration parameter to condenser temperature, critical temperature, evaporator 2 temperature or
CPT temperature parameter.
(2)
can be set through a configuration parameter to room light, demister heating elements, auxiliary, alarms, door resistors,
neutral area operation resistors, condenser fan, compressor 2, defrosting 2 evaporator fan 2, pump down valve, on/stand-
by or man in cold room
(3)
can be set through a configuration parameter to demister heating elements, auxiliary, alarms, door resistors, neutral area
operation resistors, condenser fan, compressor 2, defrosting 2 evaporator fan 2, pump down valve, on/stand-by or man in
cold room
Available options
In some models, there is a magneto-thermal switch or differential magneto-thermal circuit breaker.
Check that the switch is available for the device; contact the EVCO distribution network.
For additional information, please read chapter "TECHNICAL DATA",