Interlogix Monitor XL Advanced Installation Guide - Manual (Page 25)

21-3602E rev1.5 Monitor xL™ Advanced Installation Guide 19
Program Section: A001 (Areas)
A0xx00 Keypad Selections Note: “xx” represents the area number.
(left to right on keypad screen) Example:
Default Name
Selections Description

(yes)
Enable this Area 
(yes)
□
(no)
Whether or not this Area is defined. Area 1 is
enabled by default, and cannot be deleted.
“ OFFICE “
(12 characters) Area Name – Customize the same as the “Welcome” message.
(UK ACPO = “AREA DESCRIP”)
A0xx01 Keypad Selections Note: “xx” represents the area number.
(left to right on keypad screen) Example:
Default Name
Selections Description
09 (45 sec)
Entry Delay See below. The time permitted to disarm the area after an
entry door has been opened.
(UK ACPO=8: 30 sec)
10 (60 sec) Exit Delay See below. The time permitted to arm the area and exit.
(European=09: 45 sec)
13 (3 min) Garage Delay See below. An additional delay to arm or disarm a main area
and have adequate time to enter or exit a
protected garage.
0 Fail to Exit Mode 0=Door close, 1=Push
button, 2 = Door or push,
button, 3 = None (UK ACPO, European=1)
 (no) Stay on Fail to Exit 
(yes)
□
(no)
The area will automatically switch to 'Stay' mode
if the user fails to exit after arming the area (i.e.,
if a door is not opened).
 (no) Alarm on Fail to Exit 
(yes)
□
(no)
An alarm will be transmitted if the user fails to
exit after arming the area (i.e., if a door is not
opened).
(UK ACPO, European = yes)

(yes)
Terminate Exit Delay
(Confirm Exit Delay)

(yes)
□
(no)
The 'exit delay' will be reduced when the door
closes after the user arms the area and exits.
(UK ACPO= no)
 (no) Transmit Fail to Exit 
(yes)
□
(no)
 (no) Extend Exit-delay on
Fail to Exit 
(yes)
□
(no)
(UK ACPO = yes)
Entry/Exit/Garage Delay Times: 00 = none; 01 = 1 sec; 02 = 2 sec; 3 = 3 sec; 04 = 5 sec; 05= 10 sec; 06 = 15
sec; 07 = 20 sec; 08 = 30 sec; 09 = 45 sec; 10 = 60 sec; 11 = 90 sec; 12 = 2 min; 13 = 3 min; 14 = 5 min.

· OFFICE

Save A001

00
09 · 10 · 13 · 0 · 



Save A001

01