CIRCUTOR PowerStudio Series - Manual (Page 178)

PowerStudio PowerStudio
178 User Manual
Shows general information.
This part of the configuration corresponds to the device counters. If the selector is checked,
on sending the configuration the energy counter will be loaded with the values entered into the
corresponding boxes.
1.45.1.2 Device inputs
For each of the inputs of the LM-24 M, three variables will be available, a digital display to
show the status of the input (open / closed), a counter variable to show the number of pulses detected
at the input, and finally a flow variable calculated by the software as an estimate of the pulse frequency
on the input during a space of time.
By means of this dialogue the LM-24 M inputs can be configured.