CIRCUTOR PowerStudio Series - Manual (Page 208)

PowerStudio PowerStudio
208 User Manual
Enables the password to be enabled or deactivated to block the configuration of the device.
Configures the position of the device. The current as per the direction of the arrows, or its
opposite, and the phases, as per the sequence shown on the box, or phases 1 and 3 swapped.
Configures the position of the device. The current as per the direction of the arrows, or its
opposite, and the phases, as per the sequence shown on the box, or phases 1 and 3 swapped.
• Period: Is the integration period of the maximeter that can vary between 1 and 60 minutes.
• Window type: Type of window used to save the maximeter value; this can be fixed or sliding.
• Unit: The maximum demand can be calculated with active power III, apparent power III, or
phase current depending on the device.
• Maximeter reset: When the button is pressed, the device maximeter goes to zero.
Active energy output relay configuration. The relationship that will appear in the pulse output
can be defined. Its value corresponds to the energy, in Wh, required to generate a pulse. If the pulse
value is 0, it will be disabled.